Jiashan Fengli Auto Parts Manufacturing Co., Ltd.
Main products:Auto Parts,PTO
Products
Contact Us
  • Contact Person : Mr. Zhou Chi
  • Company Name : Jiashan Fengli Auto Parts Manufacturing Co., Ltd.
  • Tel : 86-573-84775380
  • Fax : 86-573-84778798
  • Address : Zhejiang,Jiashan,East Side Liyao Highway Yaozhuang Town Jiashan County
  • Country/Region : China

Bushings
FB090 Bronze Wrapped Bushing

FB090 Bronze Wrapped Bushing

Base Material: CuSn8P FB090 is a kind of bushing wrapped by bronze strip. The bronze is made as the particular formulation with high specific and gravity, and on its surface may be incorporated with spherical or diamond shaped indentations or/and oil grooves as required by...
JDB(500#) Solid Lubricant Inlaid Bushing

JDB(500#) Solid Lubricant Inlaid Bushing

Base Material: CuZn25Al6Fe3Mn3 JDB-1 solid lubricant embedded bushing is a new type made from strong brass and homogeneously embedded with solid lubricant in its body. It breaks through the limit of general bearing whose lubrication depends on oil film. So it is suitable for high...
SF-1 Oilless Bushing

SF-1 Oilless Bushing

Material: Steel + Porous Bronze Sinter + PTFE + Pb SF-1 is wall wrapped bushing made of triple layer composites material which be consisted of a steel backing a sintered prrous bronze particles interlayer and calendared with PTFE and Pb mixture as surface layer. It is of low...
JF-700 Bimetal Bushing

JF-700 Bimetal Bushing

Base Material: CuPb30  JF-700 is a bimetal bushing with steel as backing and sintered CuPb30 as lining layer. It has good performance in anti-seizing., alien substance contamination. It is necessary to be overplated certain soft alloy and mostly applied in internal...
JF-800 Bimetal Bushing

JF-800 Bimetal Bushing

Base Material: CuPb10Sn10  JF-800 bimetal bushing is based on steel and sintered with CuPb10Sn10 or CuSn6Zn6Pb3 as a lining layer. The strongest type of bimetal bushings and widely applicated in so many fields. This type has the best performance within the range of Cu-Pb...
SF-2 Oilless Bushing

SF-2 Oilless Bushing

Material: Steel + Porous Bronze Sinter + POM SF-2 boundary lubrication bushing is based on a composite material with 3 firmly bounded layers: steel as backing. Sintered bronze spherical powder as interlayer and modified POM as lining layer, it fits well for low speed, middle-load...
FB08G Steel + Graphite Wrapped Bushing

FB08G Steel + Graphite Wrapped Bushing

Base Material: Steel + Graphite FB08G Steel + Graphite Wrapped Bushing is made of high quality low-carbon steel, and the surface is rolled to diamond or round oil pockets. The special lubricant is embedded in the pockets. It has good lubricating and corrosion resistance property,...
FB092 Bronze Wrapped Bushing

FB092 Bronze Wrapped Bushing

Base Material: CuSn8P FB092 bronze bushing is based on bronze of CuSn8P0.3 and evenly distributed drilling oil holes on the body. When in assembly, oil or grease should be stored in the holes before bushing is sealed from both ends. FB092 has the advantages of abundant oil...


Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.